Cisco CCNA Course – CCNA Training
Unlock your future with our Cisco CCNA Training! Join now for top-notch CCNA certification preparation. Our program, led by certified expert trainers, provides 24*7 lab access for hands-on practice, focusing on practical-oriented content. Gain real-world insights, troubleshoot network issues, and build confidence for a successful career. Enroll today to unlock your networking potential and thrive in the dynamic IT landscape!
- Enrolled Students : 11210
- 4.6 / 5
WHY CCNA COURSE/CCNA TRAINING?
Cisco is the worldwide leader in IT and networking. Cisco has transformed the way people connect, communicate, and collaborate. Cisco products and solutions are deployed in companies from small & medium sizes to large enterprises.
Cisco is the most dominant player in India for network infrastructure, a clear leader in all segments – Ethernet Switch, Routers and WLAN. Hence there is a good scope for Cisco Networking Professionals in India.
CCNA certification demonstrates the skills and knowledge required to install, operate, configure, and verify basic IPv4 and IPv6 networks. The CCNA Course/CCNA Training also gives you a foundation in networking fundamentals, IP services, security fundamentals, automation, and programmability. The CCNA training course and exam give you the foundation to take your career in any direction in the IT Domain.
WHO SHOULD TAKE CCNA COURSE/CCNA TRAINING?
- Candidates passionate about achieving Cisco CCNA Certification.
- Students enthusiastic about making a career as a Network Engineer can take the CCNA Course/CCNA Training.
- Working professionals in IT networking can take the CCNA training course to enhance their knowledge and skills.
- Professionals employed in network administration, operations, and management.
- Entry-level network engineer, Network administrator, Network support technician, Network Engineers, Help desk technician
- Technicians involved in the installation, operation, and verification of Cisco networks.
PRE-REQUISITES FOR CCNA COURSE/CCNA TRAINING
There are no formal pre-requisites for CCNA Global certification Exam, but before appearing for the CCNA Course/CCNA Training, candidates should possess the following knowledge:-
- Basic Computer literacy
- Basic Internet usage skills
- Basic IP address knowledge
- Basic PC operating system navigation skills
JOB PROFILES AVAILABLE POST CCNA COURSE/CCNA TRAINING
The 200-301 Cisco CCNA Course/CCNA Training program will train and make you competent to achieve the below job titles:-
- Network Associate
- Network Administrator
- Network Engineer
- Network operations center (NOC) Engineer
- Network Support Engineer
- Entry-level network engineer
- Help desk technician
- Network support technician
DEVICES TO BE USED DURING THE CCNA COURSE/CCNA TRAINING
During the CCNA Course/CCNA Training , we provide students the opportunity to work on the following devices-
- Router: 2611 XM, 1841, 1905, 2811, and other latest series.
- Switches: 2950, 2960, 3750, 3560, and other latest series.
- Tools to be used: Cisco IOS, Putty, GNS, Cisco Packet Tracer, and EVE-NG
The above devices will provide candidates with hands-on knowledge and make them confident in operating these tools. Candidates become efficient at setting up, managing, and operating enterprise networks at the entry-level after completing the CCNA Course/CCNA Training.
CCNA COURSE/CCNA TRAINING LEARNING OUTCOMES
I-Medita Course Curriculum focuses on the blueprints of Cisco 200-301 CCNA Certification Examination. At the end of the course you will have in-depth knowledge of: Network fundamentals, network access, IP connectivity, IP services, security fundamentals, automation and programmability, Types of Networks, LAN/WAN, IP addressing & Subnetting, OSI and TCP/IP model, Configuration and troubleshooting of Switches and routers, VLANs, Routing protocols (EIGRP, OSPF), Ethernet, Network utilities (ping, tracert, arp), NAT, ACLs and much more. You will be ready to attempt the CCNA Certification Examination. CCNA Certification Training course focuses on the following aspects of Networking:
- Understanding Networking fundamentals, Network access, IP connectivity, IP services
- Learn about Security fundamentals, Automation and Programmability.
- Install, Configure, Operation, Administer, Manage, and Troubleshooting basic IPv4 and IPv6 business networks.
- Take up the Cisco 200-301 CCNACertification Exam, and get worldwide recognition
- Start your journey as a Network Administrator, Network Engineer, Network Support Engineer, or Network Associate.
- Practical Training and hands on Lab Sessions.
- Network Fundamentals and Network Components
- Characteristics of Network Components
- Role and function of network components
- Layer 2 and Layer 3 switches, NextGen Firewalls, intrusion prevention system
- Access points, Cisco DNA Center, wireless LAN controller
- Endpoints, Serves, Power over Ethernet
- Describe network topology architectures
- Understanding Two Tier, Three Tier, Spine Leaf, WAN, Small Office-Home Office, On-Premise Infra, Cloud Infra Networks
- Describe physical interface and cabling types
- Single Mode Fiber, Copper, Multi-Mode Fiber etc
- Determine interface and cable issues in the network
- Understanding TCP and UDP
- Configuration and verification of IPv4 addressing and subnetting
- Understanding private IPv4 addressing
- Configuration and verification of IPv6 addressing and subnetting
- IPv6 address types
- Understanding wireless network principles
- virtualization fundamentals (server virtualization, containers, and VRFs)
- Understanding switching concepts
- VLANs configuration and verification
- interswitch connectivity configuration and verification
- Layer 2 discovery protocols configuration and verification
- Layer 2 EtherChannel LACP configuration and verification
- Layer 3 EtherChannel LACP configuration and verification
- Operations of Rapid PVST+ Spanning Tree Protocol
- Understanding Cisco Wireless Architectures
- Understanding of Cisco Wireless AP Modes
- Describe physical infrastructure connections of WLAN elements
- Describe AP, WLC, access/trunk ports, LAG
- WLC management access connections
- Basis understanding of Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS.
- Basic wireless LAN GUI configuration understanding
- Basic configuration on a Cisco router
- Components of the routing table
- Router forwarding decision-making process
- IPv4 and IPv6 static routing configuration and verification
- Single area OSPFv2 configuration and verification
- First-hop redundancy protocols- purpose, functions, and concepts
- Inside source NAT using static and pools
- NTP operating in a client and server mode
- Role of DHCP and DNS within the network
- Function of SNMP, use of syslog
- DHCP client and relay configuration and verification
- Forwarding per-hop behavior (PHB) for QoS
- Configure network devices for remote access using SSH
- Function of TFTP/FTP in the network
- Major security concepts (threats, vulnerabilities, exploits, and mitigation techniques)
- Configure and verify device access control using local passwords
- Understanding IPsec remote access and site-to-site VPNs
- Access control lists configuration and verification
- DHCP snooping configuration and verification
- Dynamic ARP inspection configuration and verification
- Port security configuration and verification
- AAA-authentication, authorization, and accounting concepts
- Basic understanding of WPA, WPA2, and WPA3
- Importance of network automation in network management
- Traditional networks and controller-based networking comparison
- Understanding software-defined architecture
- Overlay network, underlay network, and fabric
- Understanding Northbound and Southbound APIs
- Basic understanding of device management with Cisco DNA Center
- Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)
CCNA COURSE/CCNA TRAINING LABS OUTLINE
- Cisco Command-Line Interface (CLI)
- Taking console of Router
- IOS Modes on devices
- Use of various show Commands
- Use of copy, write, erase and delete command
- Configuring various Passwords on devices
- Configuring an IPv4 address on a Router
- Configuring Telnet
- Configuring SSH
- Configuring DHCP
- Configuring DNS
- Configuring HTTP services on a Router
- Backup and Restoration of Configuration
- Performing Password Recovery on a router
- Backup of IOS on a router
- Restoration of IOS on a router
- Configuring Static Routing on two routers
- Configuring Static Host Route on Router
- Configuring Static Routing on three routers
- Changing AD Value of a Static Route
- Configuring Static Default Route on Router
- Configuring Static Discard Route on Router
- Configuring Single Area OSPF
- Verification of OSPF routing table
- Verification of neighbor table
- Verification of database table
- Verifying an OSPF process on interfaces in detail
- Changing Hello and Dead Interval on interfaces
- Changing Interface Cost
- Use of ip ospf mtu-ignore command on interface
- Changing OSPF network type
- Changing OSPF Priority on interface
- Shutting down the OSPF process on interface
- Debugging the OSPF adjacency
- Changing reference-bandwidth for cost calculation
- Flooding default route information using default-information
- Defining an administrative distance value using distance command
- Controlling the forwarding of packets over multiple paths using maximum-paths
- Using passive-interface command to suppress update information
- Changing router-id for OSPF process using router-id command
- Shutting down the OSPF process by shutdown command.
- Configuring Multi Area OSPF on router using network command
- Using show ip ospf border-routers command to verify ABRs and ASBRs
- Configuring IPv6 Static Routing on two routers using Next Hop IP Address
- Configuring IPv6 Static Host Route on Router
- Configuring IPv6 Static Routing on three routers
- Changing AD Value of an IPv6 Static Route – Path Preference; Static Floating Route
- Configuring IPv6 Static Default Route on Router
- Verifying the newly installed Static routes by show ipv6 route command
- Ping and Traceroute to check the reachability
- Mac Address-table verification
- Adding and Clearing an entry from Mac Address-table
- Changing the aging time of mac address table
- Assign IP address on VLAN interface to take backup and recover the configuration and IOS.
- Creating and renaming Access and Voice VLANs on a switch
- Assigning VLAN membership to switchports
- Verifying VLAN information by show vlan brief command
- Configuring access and trunk ports on switches
- Defining trunk encapsulation protocol; Dot1q, ISL or negotiate
- Verifying trunk ports by show interfaces trunk command
- Changing Native VLAN and removing a VLAN from allowed VLAN list on trunk ports
- Using DTP for trunking by using switchport mode dynamic auto/desirable command
- Turning off trunk negotiation by switchport nonegotiate command
- Configuring Inter-VLAN Routing using Router
- Configuring Inter-VLAN Routing using Layer 3 Switch
- Verifying Spanning Tree Protocol operation for loop avoidance
- Changing Spanning-Tree mode using spanning-tree mode command
- Manipulating Root Bridge election process
- Manipulating Root Port / Designated port election
- Configuring spanning-tree portfast feature for rapid convergence
- Configuring and verifying Port-Security on switchports
- Performing err-disable recovery of switchports
- Configuring BPDU Guard feature on switches
- Creating and defining permit/deny statements in a standard ACL
- Applying Standard Access Control List on router interface
- Verifying the reachability after applying standard ACL
- Editing existing ACL using ip access-list standard command
- Allowing specific IPs to remotely access the router by using ACL
- Creating and defining permit/deny statements in an extended ACL on router
- Applying extended Access Control List on router interface
- Verifying the reachability after applying extended ACL
- Editing existing ACL using ip access-list extended command
- Blocking services like HTTP, HTTPs, FTP, DNS, DHCP etc with extended ACL
- Configuring and applying named ACL on router
- Configuring IPv6 access-list and applying on proper interface.
- Defining Inside and Outside interface for NAT
- Configuring Static NAT on a router
- Configuring Dynamic NAT for a range of private IP addresses
- Configuring Port Address Translation
- Verifying NAT
- Debugging the NAT translations
- Clearing older translations
- Configuring HSRP
- Enabling HSRP Preempt
- Changing HSRP priority on interface
-
Tracking and Interface using standby
track command - Configuring and verifying ICMP echo-based IP SLA.
- Creating a track object for tracking the SLA, interface and route
- Using the track object in HSRP to track the reachability to the IP
-
Changing HSRP group name by standby
command - Configuring CDP and LLDP on Switches
- Verifying CDP and LLDP Status
- Configuring and Verifying NTP server on router
- Enabling SNMP on router
- Using logging host command on a router for capturing log messages on Syslog server
- Log into the WLC
- Monitor the WLC
- Configure a Dynamic (VLAN) Interface
- Configure a DHCP Scope
- Configure a WLAN
- Define a Remote Access Dial-In User Service (RADIUS) Server
- Explore Management Options
- Explore the Cisco DNA™ Center
- Configure and Verify NTP
- Configure System Message Logging
- Create the Cisco IOS Image Backup
- Upgrade the Cisco IOS Image
- Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
- Secure Console and Remote Access
- Enable and Limit Remote Access Connectivity
- Secure Device Administrative Access
- Configure and Verify Port Security
- Implement Device Hardening
CCNA COURSE/CCNA TRAINING – EXAM DETAILS
- Certification Name: CCNA -Cisco Certified Network Associate
- Exam Code: 200-301 CCNA
- Exam Duration: 120 minutes
- Available languages: English, Japanese
- Exam Location: Examination at Pearson Vue Centers.
FAQS
Prerequisites for CCNA 200-301 Certification
There are no pre-requisites for the CCNA 200-301 Certification. Anyone passionate about building a career in the Networking domain can appear for CCNA 200-301 Certification Exam.
How to schedule the CCNA 200-301 Certification Exam?
- At Test Center: Cisco CCNA certification exam is delivered in a proctored environment at a Pearson VUE Authorized Test Center. To schedule a certification exam or locate a test center visit https://home.pearsonvue.com/cisco.aspx
- OnVUE Online proctored Exam: Get Cisco CCNA certified from your home or office. You can take your Cisco CCNA examination from home through OnVUE online proctoring. A live proctor will monitor you through the webcam on your workstation to provide a secure exam experience.
The same Pearson VUE web account is used to schedule the Cisco CCNA Certification exam at the test center or via OnVUE Online proctored Exam.
What are the types of questions in the CCNA 200-301 Certification Exam?
CCNA 200-301 Certification Exam consists of following types of questions.
- Multiple choice questions with just one answer
- Multiple choice questions with more than one answers
- Drag & Drop questions
- Fill in the blanks
- Simulation Questions
Duration, No. of Questions, Criteria for Passing
CCNA 200-301 is a single exam, consisting of about 120 questions, to be answered within 120-minutes. You should score around 80 – 85 percentage marks to achieve the CCNA certification.
Cost of 200-301 CCNA Certification
200-301 CCNA Certification fees in India is $300 + Local Taxes. The exam fee is payable in US Dollars
Validity of 200-301 CCNA Certification
200-301 CCNA Certification is valid for 3 years. You must renew your certification before the expiry date.
Process to renew CCNA 200-301 Certification
There are 6 options to renew CCNA 200-301 Certification.
- Pass any one associate exam
- Pass any one professional concentration exam
- Pass one technology core exam
- Pass any one expert-level written exam
- Pass any one expert-level Lab/Practical exam
- Earn 30 CE credits
₹ 15,900
₹ 12,900
Course Features
- Total Duration : 80 Hrs (2/3 Months)
- Batches Available : Weekdays/Weekends
- Training Level : Intermediate
- Lab Access: Yes, 24*7
- Training Mode: Classroom & Online
- Language: English, Hindi
- Interview Questions: Yes
- Exam Practice Questions: Yes
- Training Certificate: Yes
- Students Enrolled: 11210
- Placement Assistance: Yes
