Best CCNA Training in Pune - CCNA Institute in Pune
Embark on a transformative journey with our premier CCNA Training in Pune at the top-rated CCNA Institute in Pune. Immerse yourself in a dynamic learning experience with expert instructors, 24*7 access to real labs, and the official Cisco curriculum. We go beyond education, providing placement assistance to ensure your success in the IT realm. Elevate your skills, secure your future—enroll today for a comprehensive CCNA course that shapes careers!
- Enrolled Students : 11210
- 4.6 / 5
WHAT YOU'LL LEARN IN CCNA TRAINING IN PUNE
- The CCNA training helps in building a comprehensive understanding applicable to all IT careers.
- Participants in this program will gain proficiency in installing, operating, configuring, and verifying both basic IPv4 and IPv6 networks.
- The training curriculum encompasses the configuration of critical network components such as switches, routers, and wireless LAN controllers.
- Participants will develop the skills necessary for managing diverse network devices effectively.
- Participants will acquire the knowledge and skills required to install, configure, and operate a small- to medium-sized network.
- The program places a strong emphasis on the identification and mitigation of basic security threats, fostering a proactive approach to network protection.
- A foundational understanding of network programmability, automation, and software-defined networking is a key takeaway from the training.
- The program provides a solid foundation in essential networking aspects, including security and automation.
- Skills related to network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability will be cultivated through the training.
- Successful completion of this CCNA training empowers participants to confidently navigate and excel in L1 network level interviews.
- The training serves as a robust foundation for those aspiring to advance into the more challenging CCNP and CCIE tracks, establishing a strong foothold for future career progression.
- Participants in this training program are not only equipped with practical skills but are also well-prepared to undertake the Cisco CCNA Official certification exam, ensuring their readiness for industry-recognized validation.
HOW YOU'LL BENEFIT FROM CCNA TRAINING IN PUNE
- Versatility Boost: CCNA training hones a versatile skill set crucial for diverse IT roles.
- Career Confidence: Graduates are interview-ready for entry-level network positions, enhancing employability.
- Strong Foundation: Gain foundational knowledge in network installation, configuration, and operation.
- Path to Advancement: CCNA serves as a foundation for advanced training like CCNP Enterprise and CCIE.
- Industry Credibility: Widely recognized, CCNA completion adds credibility and boosts career prospects.
- Security Exposure: Learn to identify and mitigate security threats for a comprehensive security understanding.
- Automation Edge: Exposure to network programmability and automation keeps you ahead in tech trends.
- Certification Ready: CCNA training ensures readiness for the Cisco CCNA Official certification exam, validating expertise.
WHO SHOULD ENROLL IN CCNA TRAINING IN PUNE
Wondering who should take the plunge into CCNA training? Here’s a guide to potential enrollees:
- Aspiring IT Professionals
- Networking Enthusiasts
- Entry-Level Technicians
- Career Switchers
- IT Support Personnel
- CCNA Certification Aspirants
- Future Network Engineers
- IT Networking Professionals
- Network Operations
- Network Administrators
CCNA TRAINING IN PUNE PREREQUISITES
There are no formal pre-requisites for CCNA Global certification Exam, but before appearing for the Cisco CCNA training course, candidates should possess the following knowledge:
- Basic Computer literacy
- Basic Internet usage skills
- Basic PC operating system navigation skills
- Basic IP address knowledge
JOB PROFILES AVAILABLE POST CCNA COURSE IN PUNE
Cisco CCNA training program will train and make candidates competent to achieve the below job titles:
- Network Engineer
- Network operations center (NOC) Engineer
- Network Support Engineer
- Network Associate
- Network Administrator
- Entry-level network engineer
- Network support technician
- Help desk technician
CCNA TRAINING IN PUNE OBJECTIVES
Cisco CCNA Training course focuses on the following aspects of Networking:
- Understanding Networking fundamentals, Network access, IP connectivity, IP services
- Learn about Security fundamentals, Automation and Programmability.
- Install, Configure, Operation, Administer, Manage, and Troubleshooting basic IPv4 and IPv6 business networks.
- Take up the Cisco 200-301 CCNACertification Exam, and get worldwide recognition
- Start your journey as a Network Administrator, Network Engineer, Network Support Engineer, or Network Associate with reputed companies.
- Practical Training and hands on Lab Sessions.
- Network Fundamentals and Network Components
- Characteristics of Network Components
- Role and function of network components
- Layer 2 and Layer 3 switches, NextGen Firewalls, intrusion prevention system
- Access points, Cisco DNA Center, wireless LAN controller
- Endpoints, Serves, Power over Ethernet
- Describe network topology architectures
- Understanding Two Tier, Three Tier, Spine Leaf, WAN, Small Office-Home Office, On-Premise Infra, Cloud Infra Networks
- Describe physical interface and cabling types
- Single Mode Fiber, Copper, Multi-Mode Fiber etc
- Determine interface and cable issues in the network
- Understanding TCP and UDP
- Configuration and verification of IPv4 addressing and subnetting
- Understanding private IPv4 addressing
- Configuration and verification of IPv6 addressing and subnetting
- IPv6 address types
- Understanding wireless network principles
- virtualization fundamentals (server virtualization, containers, and VRFs)
- Understanding switching concepts
- VLANs configuration and verification
- interswitch connectivity configuration and verification
- Layer 2 discovery protocols configuration and verification
- Layer 2 EtherChannel LACP configuration and verification
- Layer 3 EtherChannel LACP configuration and verification
- Operations of Rapid PVST+ Spanning Tree Protocol
- Understanding Cisco Wireless Architectures
- Understanding of Cisco Wireless AP Modes
- Describe physical infrastructure connections of WLAN elements
- Describe AP, WLC, access/trunk ports, LAG
- WLC management access connections
- Basis understanding of Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS.
- Basic wireless LAN GUI configuration understanding
- Basic configuration on a Cisco router
- Components of the routing table
- Router forwarding decision-making process
- IPv4 and IPv6 static routing configuration and verification
- Single area OSPFv2 configuration and verification
- First-hop redundancy protocols- purpose, functions, and concepts
- Inside source NAT using static and pools
- NTP operating in a client and server mode
- Role of DHCP and DNS within the network
- Function of SNMP, use of syslog
- DHCP client and relay configuration and verification
- Forwarding per-hop behavior (PHB) for QoS
- Configure network devices for remote access using SSH
- Function of TFTP/FTP in the network
- Major security concepts (threats, vulnerabilities, exploits, and mitigation techniques)
- Configure and verify device access control using local passwords
- Understanding IPsec remote access and site-to-site VPNs
- Access control lists configuration and verification
- DHCP snooping configuration and verification
- Dynamic ARP inspection configuration and verification
- Port security configuration and verification
- AAA-authentication, authorization, and accounting concepts
- Basic understanding of WPA, WPA2, and WPA3
- Importance of network automation in network management
- Traditional networks and controller-based networking comparison
- Understanding software-defined architecture
- Overlay network, underlay network, and fabric
- Understanding Northbound and Southbound APIs
- Basic understanding of device management with Cisco DNA Center
- Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)
CCNA TRAINING IN PUNE OUTLINE
- Computer network – Components and their characteristics
- Host-to-Host communication (Switch and Routers)
- Cisco Internetwork Operating System (IOS®) Software – Features and Functions
- LANs and the role of switches within LANs
- Ethernet as the network access layer of TCP/IP
- Operation of switches
- Installing a switch and performing the initial configuration
- TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- TCP/IP Transport layer and Application layer
- Functions of routing
- Basic configuration on a Cisco router
- Common switched network issues and common problems associated with IPv4 addressing
- IPv6 – Main features, addresses, and configuration
- Verify basic IPv6 connectivity
- Static Routing – operation, benefits, and limitations
- VLANs and Trunks – Describe, Implement, and Verify
- Inter-VLAN Routing – Application and Configuration
- Dynamic Routing Protocols
- Open Shortest Path First (OSPF)- Components and Terms
- Working of Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP)
- Configure link aggregation using EtherChannel
- Purpose of Layer 3 redundancy protocols
- Basic WAN and VPN concepts
- Operation of Access Control Lists (ACLs) and their application
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients
- Configure Network Address Translation (NAT) on Cisco routers
- Quality of Service (QoS) concepts
- Concepts of wireless networks, Types of Wireless Networks
- Wireless LAN Controllers (WLCs) Uses
- Describe network and device architectures and introduce virtualization
- Network Programmability and Software-Defined Networking (SDN)
- Cisco DNA Center™, Software-Defined Access (SD-Access), and Software-Defined Wide Area Network (SD-WAN)
- Basic IOS system monitoring tools configuration
- Management of Cisco devices
- The current security threat landscape
- Threat defense technologies
- Basic security configuration of the device management plane
- Implement steps to harden network devices
LABS TO BE COVERED DURING CCNA TRAINING IN PUNE
- Cisco Command-Line Interface (CLI)
- Taking console of Router
- IOS Modes on devices
- Use of various show Commands
- Use of copy, write, erase and delete command
- Configuring various Passwords on devices
- Configuring an IPv4 address on a Router
- Configuring Telnet
- Configuring SSH
- Configuring DHCP
- Configuring DNS
- Configuring HTTP services on a Router
- Backup and Restoration of Configuration
- Performing Password Recovery on a router
- Backup of IOS on a router
- Restoration of IOS on a router
- Configuring Static Routing on two routers
- Configuring Static Host Route on Router
- Configuring Static Routing on three routers
- Changing AD Value of a Static Route
- Configuring Static Default Route on Router
- Configuring Static Discard Route on Router
- Configuring Single Area OSPF
- Verification of OSPF routing table
- Verification of neighbor table
- Verification of database table
- Verifying an OSPF process on interfaces in detail
- Changing Hello and Dead Interval on interfaces
- Changing Interface Cost
- Use of ip ospf mtu-ignore command on interface
- Changing OSPF network type
- Changing OSPF Priority on interface
- Shutting down the OSPF process on interface
- Debugging the OSPF adjacency
- Changing reference-bandwidth for cost calculation
- Flooding default route information using default-information
- Defining an administrative distance value using distance command
- Controlling the forwarding of packets over multiple paths using maximum-paths
- Using passive-interface command to suppress update information
- Changing router-id for OSPF process using router-id command
- Shutting down the OSPF process by shutdown command.
- Configuring Multi Area OSPF on router using network command
- Using show ip ospf border-routers command to verify ABRs and ASBRs
- Configuring IPv6 Static Routing on two routers using Next Hop IP Address
- Configuring IPv6 Static Host Route on Router
- Configuring IPv6 Static Routing on three routers
- Changing AD Value of an IPv6 Static Route – Path Preference; Static Floating Route
- Configuring IPv6 Static Default Route on Router
- Verifying the newly installed Static routes by show ipv6 route command
- Ping and Traceroute to check the reachability
- Mac Address-table verification
- Adding and Clearing an entry from Mac Address-table
- Changing the aging time of mac address table
- Assign IP address on VLAN interface to take backup and recover the configuration and IOS.
- Creating and renaming Access and Voice VLANs on a switch
- Assigning VLAN membership to switchports
- Verifying VLAN information by show vlan brief command
- Configuring access and trunk ports on switches
- Defining trunk encapsulation protocol; Dot1q, ISL or negotiate
- Verifying trunk ports by show interfaces trunk command
- Changing Native VLAN and removing a VLAN from allowed VLAN list on trunk ports
- Using DTP for trunking by using switchport mode dynamic auto/desirable command
- Turning off trunk negotiation by switchport nonegotiate command
- Configuring Inter-VLAN Routing using Router
- Configuring Inter-VLAN Routing using Layer 3 Switch
- Verifying Spanning Tree Protocol operation for loop avoidance
- Changing Spanning-Tree mode using spanning-tree mode command
- Manipulating Root Bridge election process
- Manipulating Root Port / Designated port election
- Configuring spanning-tree portfast feature for rapid convergence
- Configuring and verifying Port-Security on switchports
- Performing err-disable recovery of switchports
- Configuring BPDU Guard feature on switches
- Creating and defining permit/deny statements in a standard ACL
- Applying Standard Access Control List on router interface
- Verifying the reachability after applying standard ACL
- Editing existing ACL using ip access-list standard command
- Allowing specific IPs to remotely access the router by using ACL
- Creating and defining permit/deny statements in an extended ACL on router
- Applying extended Access Control List on router interface
- Verifying the reachability after applying extended ACL
- Editing existing ACL using ip access-list extended command
- Blocking services like HTTP, HTTPs, FTP, DNS, DHCP etc with extended ACL
- Configuring and applying named ACL on router
- Configuring IPv6 access-list and applying on proper interface.
- Defining Inside and Outside interface for NAT
- Configuring Static NAT on a router
- Configuring Dynamic NAT for a range of private IP addresses
- Configuring Port Address Translation
- Verifying NAT
- Debugging the NAT translations
- Clearing older translations
- Configuring HSRP
- Enabling HSRP Preempt
- Changing HSRP priority on interface
- Tracking and Interface using standby
track command - Configuring and verifying ICMP echo-based IP SLA.
- Creating a track object for tracking the SLA, interface and route
- Using the track object in HSRP to track the reachability to the IP
- Changing HSRP group name by standby
command - Configuring CDP and LLDP on Switches
- Verifying CDP and LLDP Status
- Configuring and Verifying NTP server on router
- Enabling SNMP on router
- Using logging host command on a router for capturing log messages on Syslog server
- Log into the WLC
- Monitor the WLC
- Configure a Dynamic (VLAN) Interface
- Configure a DHCP Scope
- Configure a WLAN
- Define a Remote Access Dial-In User Service (RADIUS) Server
- Explore Management Options
- Explore the Cisco DNA™ Center
- Configure and Verify NTP
- Configure System Message Logging
- Create the Cisco IOS Image Backup
- Upgrade the Cisco IOS Image
- Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
- Secure Console and Remote Access
- Enable and Limit Remote Access Connectivity
- Secure Device Administrative Access
- Configure and Verify Port Security
- Implement Device Hardening
DEVICES TO BE USED FOR LABS DURING CCNA COURSE IN PUNE
During the Cisco CCNA course at our premier CCNA Institute in Pune, students have the opportunity to work with the following devices. These devices and tools offer hands-on experience, empowering candidates to confidently operate and manage enterprise networks at the entry level upon completion of the Cisco CCNA classes in Pune.
- Tools to be used: Cisco IOS, Putty, GNS, Cisco Packet Tracer, and EVE-NG
- Router: 2611 XM, 1841, 1905, 2811, and other latest series.
- Switches: 2950, 2960, 3750, 3560, and other latest series.
TRAINING DETAILS - CCNA TRAINING IN PUNE
| Training Name | CCNA TRAINING IN PUNE |
| Training Type | Instructor Led Training (Classroom/Online) |
| Batches Available | Regular (Mon-Thu) and (Sat-Sun) |
| Training Duration | 80-90 Hours (2-3 Months) |
| Daily Training Hours | 2/3 hours per day |
| Payment Mode | Cash, Credit Card, Debit Card, Bank Transfer, No Cost EMI, UPI, Paypal, Western Union etc. |
| Recorded Video Lectures | 06 months same classes video recording access |
| Lab Access | Yes Provided (24*7) |
| Study Material | Workbooks, Notes Handouts, Exam Prep Material, Interview Prep Material |
| Learning Portal | World-class learning system (Web portal, iOS Application, Android Application) |
CISCO CCNA CERTIFICATION EXAM DETAILS
- Exam Code: 200-301 CCNA
- Exam Name: Implementing and Administering Cisco Solutions
- Exam Duration: 120 minutes
- Available languages: English and Japanese
- Exam Location: Via Pearson Vue Exam Centers
- Vendor Name: Cisco Systems
FAQS
Prerequisites for CCNA 200-301 Certification
There are no pre-requisites for the CCNA 200-301 Certification. Anyone passionate about building a career in the Networking domain can appear for CCNA 200-301 Certification Exam.
How to schedule the CCNA 200-301 Certification Exam?
- At Test Center: Cisco CCNA certification exam is delivered in a proctored environment at a Pearson VUE Authorized Test Center. To schedule a certification exam or locate a test center visit https://home.pearsonvue.com/cisco.aspx
- OnVUE Online proctored Exam: Get Cisco CCNA certified from your home or office. You can take your Cisco CCNA examination from home through OnVUE online proctoring. A live proctor will monitor you through the webcam on your workstation to provide a secure exam experience.
The same Pearson VUE web account is used to schedule the Cisco CCNA Certification exam at the test center or via OnVUE Online proctored Exam.
What are the types of questions in the CCNA 200-301 Certification Exam?
CCNA 200-301 Certification Exam consists of following types of questions.
- Multiple choice questions with just one answer
- Multiple choice questions with more than one answers
- Drag & Drop questions
- Fill in the blanks
- Simulation Questions
Duration, No. of Questions, Criteria for Passing
CCNA 200-301 is a single exam, consisting of about 120 questions, to be answered within 120-minutes. You should score around 80 – 85 percentage marks to achieve the CCNA certification.
Cost of 200-301 CCNA Certification
200-301 CCNA Certification fees in India is $300 + Local Taxes. The exam fee is payable in US Dollars
Validity of 200-301 CCNA Certification
200-301 CCNA Certification is valid for 3 years. You must renew your certification before the expiry date.
Process to renew CCNA 200-301 Certification
There are 6 options to renew CCNA 200-301 Certification.
- Pass any one associate exam
- Pass any one professional concentration exam
- Pass one technology core exam
- Pass any one expert-level written exam
- Pass any one expert-level Lab/Practical exam
- Earn 30 CE credits
₹ 15,900
₹ 12,900
Course Features
- Total Duration : 80-90 Hours (2-3 Months)
- Batches Available : Weekdays/Weekends
- Training Level : Associate
- Lab Access: Yes, 24*7
- Training Mode: Classroom & Online
- Language: English, Hindi
- Interview Questions: Yes
- Exam Practice Questions: Yes
- Training Certificate: Yes
- Students Enrolled: 6,000+
- Placement Assistance: Yes
EVENTS
Stay Ahead with Our Upcoming Training
MEET OUR EXPERT TRAINERS
Elevate Your learning with Our Certified Expert Trainers!
Baldev Singh
15+ Years of Experience
CCIE Sec # 37094, PCNSE, CCSE, MCSE
Saurabh Yadav
15+ Years of Experience
Triple CCIE EI, Security, SP # 46962
Sudhanshu Bhat
12+ Years of Experience
CCIE # 41212, AWS, PCNSE, CEH, CEI
Surendra Singh
10+ Years of Experience
CCIE EI # 60346, SDWAN, ENCOR
Shubham Singh
10+ Years of Experience
CCIE Sec # 58858, CCSE, CCMSE, PCNSE
Yuvraj Singh
06+ Years of Experience
CCNA, CCNP, ENCOR, CEH, ENARSI
Vikas Nichal
08+ Years of Experience
CCNA, CCNP, ENARSI, ENCOR
Deep Lepcha
10+ Years of Experience
Ansible, CCNP, CEH, Linux
Rahul Kamble
10+ Years of Experience
AWS, Azure, GCP, Cloud Security
Success Stories
Celebrating the Journey from training to Career – Hear from Our Placed students!
Multitrack Program >> L&T
Vinay Ranjan
Vinay embarked on his journey with I-MEDITA, enrolling in the Multi-Track (JGP) Training program. This comprehensive program covered various courses, including CCNA200-301, CCNP ENARSI, CCNP ENCOR, Firewall training,..
Multitrack Program >> TCL
Shalini Chaudhari
Shalini also praises the extensive practice and interview questions provided during the training, which played a crucial role in her preparation for the real-world challenges she faced during job interviews...
Multitrack Program >> Infosys
Vikas Mulik
Vikas Mulik shares his experience of enrolling in the CCIE Security training with I-Medita. He talks about how the training helped him gain the knowledge and skills needed to secure a job as a Network Security Expert with Infosys...
Multitrack Program >> Wipro
Prerna Ramraje
Prerna dives into her experience with I-MEDITA's comprehensive Job Guarantee Program, highlighting how the institute's top-notch training quality, innovative teaching methods, and hands-on practice sessions played a pivotal role...
Multitrack Program >> CompuCom
Sudhanshu Wasu
Sudhanshu's dedication and hard work paid off as he secured a job change with an amazing 200% salary hike after completing the Multi Track training. In this video, he highlights the key factors that contributed to his success,..
Multitrack Program >> SecurView
Kaustubh Malunjkar
Kaustubh Malunjkar talks about his experience at I-MEDITA and how the training program helped him not only acquire the necessary technical skills but also the confidence to tackle the challenges of the industry...
Multitrack Program >> Wipro Limited
Manisha Pandey
Manisha's journey began with a passion for technology and a desire to carve out a successful career in IT networking. Armed with determination and ambition, she embarked on her journey by enrolling in I-MEDITA's training programs,..
Multitrack Program >> Hitachi
Niraj Barbhaya
Niraj's journey is a testament to the power of comprehensive training and determination. He completed a range of training courses at I-MEDITA, including CCNA, CCNP, Firewalls, AWS, and Personality Development.Through his engaging narrative,..
Multitrack Program >> TCL
Pravin Khobragade
Pravin commends the high-quality training provided by I-MEDITA, emphasizing the depth of knowledge and expertise demonstrated by our instructors. He highlights how our training program equips students with the practical skills...
YOU MAY LIKE
Multi-Track Job Guaranteed Training for Network Engineers
₹ 100,000 ₹ 89,000
Cyber Security Engineer Job Guaranteed Training
₹ 120,000 ₹ 109,000
Multi-Vendor Job Guaranteed Training for Network Engineers
₹ 150,000 ₹ 130,000
CCIE Enterprise Infrastructure Certification Training
₹ 110,000 ₹ 99,000
CCIE Security Certification Training
₹ 110,000 ₹ 99,000
Cisco CCNA Certification Training
₹ 15,900 ₹ 12,900
Cisco CCNP Enterprise Certification Training
Cisco CCNP Security Certification Training
Cisco SD-WAN Solutions (ENSDWI) Training
₹ 21,900 ₹ 17,900
Cisco SDA Training (SD Access) Training
₹ 19,900 ₹ 15,900
Palo Alto Firewall PCNSA/PCNSE Training
₹ 21,900 ₹ 17,900
Checkpoint Firewall CCSA/CCSE Training
₹ 21,900 ₹ 17,900
Fortinet Fortigate Firewall Training
₹ 21,900 ₹ 17,900
F5 Load Balancer Certification Training
₹ 27,900 ₹ 21,900
AWS Solutions Architect – Associate Training
₹ 15,900 ₹ 13,900
Certified Ethical Hacker Certification Training
₹ 46,800 ₹ 41,900
Cisco Devnet Associate Certification Training
₹ 21,900 ₹ 17,900
Redhat Ansible Network Automation Training
₹ 34,900 ₹ 24,900
Cisco Identity Services Engine (ISE) Training
₹ 19,900 ₹ 15,900
AWS Advanced Networking Specialty Training
₹ 34,900 ₹ 24,900
A GREAT PLACE TO LEARN AND GROW
At I-Medita, we’re your launchpad for growth – a place where learning transforms into success.
Authorized Vendor & Certification Partners
