Cisco CCIE Enterprise Bootcamp - CCIE Bootcamp

Welcome to our transformative CCIE Bootcamp – your gateway to mastering Cisco’s CCIE Enterprise Infrastructure (CCIE EI) v1.1. Elevate your networking skills under the guidance of expert instructors, ensuring an immersive learning experience. Access real-world scenarios anytime with our 24*7 available CCIE EI v1.1 Real-Labs mock labs. Dive deep into the official Cisco CCIE EI curriculum, exclusivley designed to align with industry standards. This Cisco CCIE Enterprise Bootcamp is not just a course; it’s a comprehensive journey that empowers you to excel in the dynamic realm of enterprise networking.

WHY CCIE BOOTCAMP?

Prepare to navigate the complexities of CCIE EI v1.1 with hands-on exercises, cutting-edge content, and personalized guidance. Whether you’re aiming to enhance your career or seeking to certify your expertise, our Cisco CCIE Enterprise Bootcamp is the catalyst for your success. Embark on this learning adventure, where theory meets practice, and transform your skills into a competitive advantage. Join us and be part of a community that thrives on excellence.

This boot camp is approximately 60% lecture and 40% hands-on labs. This Cisco CCIE Enterprise Bootcamp, is a focused 30-day program covering all CCIE Enterprise Infrastructure v1.0 exam blueprints. Through a mix of lectures and labs, dive deep into protocols and topics. The first 15 days emphasize technology and labs, while the next 15 intensively prepare you with CCIE EI Lab exam Mock Labs. Access online racks 24/7 for exam-ready practice. Elevate your skills, conquer the exam, and advance your networking career. Ready for the ultimate CCIE Enterprise experience?

WHAT YOU'LL LEARN IN CISCO CCIE ENTERPRISE BOOTCAMP?

In our CCIE Bootcamp, you’ll master the intricacies of Cisco’s CCIE Enterprise Infrastructure (CCIE EI) v1.1 lab exam module. Gain expertise under the guidance of seasoned instructors, covering the full spectrum of CCIE EI v1.1 Real-Labs. Delve into the official Cisco CCIE EI curriculum, combining theory and hands-on experience. Key Learnings are:

Expert Instruction: Learn from industry experts for a comprehensive understanding.
Hands-on Practice: Access 24*7 Real-Labs mock labs to apply theoretical knowledge in practical scenarios.
Official Cisco Curriculum: Follow the official CCIE EI curriculum to align with industry standards.
In-depth Exploration: Navigate through different protocols and topics essential for CCIE success.
Mock Lab Mastery: Engage in multiple CCIE EI Lab exam Mock Labs for thorough exam preparation.

HOW YOU'LL BENEFIT FROM THIS CCIE BOOTCAMP?

Expert Guidance: Receive personalized instruction from seasoned professionals, ensuring a deep understanding of CCIE Enterprise Infrastructure (CCIE EI) v1.1.
Real-world Application: Access 24*7 Real-Labs mock labs, translating theoretical knowledge into practical expertise for seamless application in real-world scenarios.
Certification Readiness: Navigate the official Cisco CCIE EI curriculum, preparing yourself comprehensively for the certification exam.
Holistic Learning: Experience a well-rounded approach with a mix of lectures and hands-on labs, fostering a thorough grasp of CCIE EI v1.1 concepts.
Exam Simulation: Engage in multiple CCIE EI Lab exam Mock Labs, honing your skills and boosting confidence for the actual exam.
Flexible Learning: Benefit from the convenience of online rack access, allowing round-the-clock practice to suit your schedule.

WHO SHOULD ENROLL IN THIS CISCO CCIE ENTERPRISE BOOTCAMP

Candidates that need to acquire CCIE Enterprise Infrastructure v1.0 Certification.
Network Architects
Solutions Architects
Network Consultants
Experienced Network Professionals
Security Professionals
Cloud Infrastructure Specialists
Data Center Managers
Wireless Networking Engineers
Cybersecurity Analysts
DevOps Engineers
System Integrators
Telecommunications Engineers
Emerging Technology Enthusiasts
IT Professionals Pursuing Career Advancement
Technology Enthusiasts
Professionals Seeking Cross-Functional Skills

CCIE BOOTCAMP PREREQUISITES

There No formal prerequisites are required for CCIE Enterprise Infrastructure certification.
Certification Process: Successfully complete two exams: Qualifying exam (ENCOR) covering core enterprise infrastructure technologies followed by CCIE Enterprise Infrastructure v1.0 Hands-on lab exam
We recommend you have an understanding of designing, deploying, operating and optimizing enterprise networking technologies, strong networking basics, real-world experience, Cisco tech familiarity, TCP/IP understanding, routing and switching knowledge, network security principles, hands-on dedication, and commitment to continuous learning.

EQUIPMENT AND SOFTWARE LIST FOR CCIE CERTIFICATION

The training, hardware and software versions listed below are as per CCIE Enterprise Infrastructure v1.0.

Virtual machines

Cisco CSR 1000v Series Cloud Services Routers with Cisco IOS XE SD-WAN Release 16.12
Cisco IOSv with Cisco IOS Software Release 15.8
Cisco IOSv-L2 with Cisco IOS Software Release 15.2
Cisco SD-WAN (vManage, vBond, vSmart, vEdge) Software Release 18.4
Cisco DNA Center Release 1.3.1

Physical Equipment

Cisco Catalyst 9300 Series Switches Release 16.12

Supporting virtual machines

Cisco Identity Services Engine 2.6
Microsoft Windows 10 Professional
Ubuntu Desktop 18.04 LTS

CCIE BOOTCAMP CURRICULUM

Switched Campus

Switch administration
Managing MAC address table
Errdisable recovery
L2 MTU
Layer 2 protocols: CDP, LLDP, UDLD
VLAN technologies: Access ports, Trunk ports (802.1Q), Native VLAN
Manual VLAN pruning
VLAN database
Normal and extended range VLANs
Voice VLAN
VTP (VLAN Trunking Protocol)
EtherChannel: LACP, static, load balancing
Layer 2, Layer 3 EtherChannel
EtherChannel Misconfiguration Guard
Spanning Tree Protocol: PVST+, Rapid PVST+, MST
Switch priority, port priority, path cost, STP timers
PortFast, BPDU Guard, BPDU Filter
Loop Guard, Root Guard

Routing Concepts:

Administrative distance
VRF-lite (Virtual Routing and Forwarding)
Static routing
Policy-Based Routing
VRF-aware routing with any routing protocol
Route filtering with any routing protocol
Manual summarization with any routing protocol
Redistribution between any pair of routing protocols
Routing protocol authentication
Bidirectional Forwarding Detection

EIGRP:

Adjacencies
Best path selection: RD, FD, FC, successor, feasible successor
Classic Metrics and Wide Metrics
Operations: General operations, Topology table, Packet types
Stuck In Active
Graceful shutdown
EIGRP load balancing: Equal-cost, Unequal-cost, Add-path
EIGRP Named Mode
Optimization, convergence, and scalability
Fast convergence requirements
Query propagation boundaries
IP FRR (single hop)
Leak-map with summary routes
EIGRP stub with leak map

OSPF (v2 and v3):

Adjacencies
Network types, area types
Path preference
Operations: General operations, Graceful shutdown, GTSM
Optimization, convergence, and scalability
Metrics: LSA throttling, SPF tuning, fast hello
LSA propagation control (area types)
Stub router
Loop-free alternate
Prefix suppression

BGP:

IBGP and EBGP peer relationships
Peer-group/update-group, template
Active, passive
Timers
Dynamic neighbors
4-byte AS numbers, Private AS
Path selection, Attributes, Best path selection algorithm
Load balancing, Routing policies
Attribute manipulation, Conditional advertisement
Outbound Route Filtering
Standard and extended communities
Multi-homing
AS path manipulations: local-as, allowas-in, remove-private-as, Prepend, Regexp
Convergence and scalability
Route reflector
Aggregation, as-set
Other BGP features: Multipath, add-path, Soft reconfiguration, Route Refresh

Multicast:

Layer 2 multicast
IGMPv2, IGMPv3
IGMP Snooping, PIM Snooping
IGMP Querier
IGMP Filter
MLD
Reverse path forwarding check
PIM: Sparse Mode, Static RP, BSR, AutoRP
Group to RP Mapping
Bidirectional PIM
Source-Specific Multicast
Multicast boundary, RP announcement filter
PIMv6 Anycast RP
IPv4 Anycast RP using MSDP
Multicast multipath

Cisco SD Access :

Designing SD Access solution
Underlay network (IS-IS, manual/PnP)
Overlay fabric design (LISP, VXLAN, Cisco TrustSec)
Fabric domains (single/multi-site with SD-WAN transit)
SD Access deployment
DNA Center device discovery and management
Adding fabric node devices
Wired endpoint onboarding
Fabric border handoff
Segmentation: Macro-level (VNs), Micro-level (SGTs via Cisco ISE)
Assurance: Network and client health (360)
Monitoring and troubleshooting

Cisco SD-WAN :

Designing SD-WAN solution
Orchestration: vBond, NAT
Management: vManage
Control: vSmart, OMP
Data: vEdge/cEdge
WAN edge deployment
Onboarding new edge routers
Zero-touch provisioning/Plug-And-Play
OMP, TLOC, Configuration templates
Localized policies (QoS only)
Centralized policies
Application Aware Routing
Topologies

MPLS and VPN :

Operations: Label stack, LSR, LSP
LDP, MPLS ping, MPLS traceroute
L3VPN: PE-CE routing, MP-BGP VPNv4/VPNv6
Extranet (route leaking)
DMVPN: Troubleshoot Phase 3 with dual-hub, NHRP
IPsec/IKEv2 using pre-shared key
Per-Tunnel QoS
FlexVPN use-cases
Site-to-Site, Server, Client, Spoke-to-Spoke
MPLS over FlexVPN

Device Security on Cisco IOS XE & Network Security

Control plane policing and protection
AAA
Switch security features
VACL, PACL
Storm control
DHCP Snooping, DHCP option 82
IP Source Guard
Dynamic ARP Inspection
Port Security
Private VLAN
Router security features
IPv6 Traffic Filters
IPv4 Access Control Lists
Unicast Reverse Path Forwarding
IPv6 infrastructure security features
RA Guard
DHCP Guard
Binding table
Device tracking
ND Inspection/Snooping
Source Guard
IEEE 802.1X Port-Based Authentication
Device roles, port states
Authentication process
Host modes

System Management

Device management
Console and VTY
SSH, SCP
RESTCONF, NETCONF
SNMP
v2c
v3
Logging
Local logging, syslog, debugs, conditional debugs
Timestamps

Quality of Service

End to end L3 QoS using MQC
DiffServ
CoS and DSCP Mapping
Classification
Network Based Application Recognition (NBAR)
Marking using IP Precedence, DSCP, CoS
Policing, shaping
Congestion management and avoidance
HQoS, Sub-rate Ethernet Link

Network Services

First Hop Redundancy Protocols
HSRP, GLBP, VRRP
Redundancy using IPv6 RS/RA
Network Time Protocol
Master, client
Authentication
DHCP on Cisco IOS
Client, server, relay
Options
SLAAC/DHCPv6 interaction
Stateful, stateless DHCPv6
DHCPv6 Prefix Delegation
IPv4 Network Address Translation
Static NAT, PAT
Dynamic NAT, PAT
Policy-based NAT, PAT
VRF-aware NAT, PAT
IOS-XE VRF-Aware Software Infrastructure (VASI) NAT

Network optimization

IP SLA
ICMP probes
UDP probes
TCP probes
Tracking object
Flexible NetFlow

Network operations

Traffic capture
SPAN
RSPAN
ERSPAN
Embedded Packet Capture
Cisco IOS-XE troubleshooting tools
Packet Trace
Conditional debugger (debug platform condition)

Infrastructure Automation and Programmability

Data encoding formats – JSON, XML
Automation and scripting- EEM applets, Guest shell, Linux environment, CLI Python module, EEM Python module
Interaction with vManage API
Python requests library and Postman
Monitoring endpoints
Configuration endpoints
Interaction with Cisco DNA Center API
HTTP request (GET, PUT, POST) via Python requests library and Postman
Interaction with Cisco IOS XE API
Via NETCONF/YANG using Python ncclient library
Via RESTCONF/YANG using Python requests library and Postman
Deploy and verify model-driven telemetry
Configure on-change subscription using gRPC

CISCO CCIE CERTIFICATION v1.1 LAB EXAM DETAILS

Exam Name: CCIE Enterprise Infrastructure v1.0
Duration: 8 hours
Exam Module 1: Design (3 hours)
Exam Module 2: Deploy, Operate and Optimize (5 hours)
Exam Location: This exam is conducted at the Cisco Lab Exam centers only.
Vendor Name: Cisco Systems
Exam Cost: $1600 USD, plus tax

SOME RECOMMEDNED BOOKS FOR CCIE BOOTCAMP

CCIE Enterprise Infrastructure Foundation By Narbik Kocharians
Art of Network Architecture, The: Business-Driven Design
CCIE Routing and Switching v5.0 Official Cert Guide Vol 1 Premium Edition eBook/Practice Test, 5th Edition
CCIE Routing and Switching v5.0 Official Cert Guide, Volume 1, 5th Edition
CCIE Routing and Switching v5.0 Official Cert Guide, Volume 2, 5th Edition
Cisco CCIE Routing and Switching v5.0 Configuration and Troubleshooting Practice Labs Bundle
Cisco CCIE Routing and Switching v5.0 Configuration Practice Labs, 3rd Edition
Cisco CCIE Routing and Switching v5.0 Troubleshooting Practice Labs, 2nd Edition
Cisco LAN Switching (CCIE Professional Development series)
Deploying IPv6 Networks
Inside Cisco IOS Software Architecture (CCIE Professional Development Series)
Internet Routing Architectures, 2nd Edition
IP Routing on Cisco IOS, IOS XE, and IOS XR: An Essential Guide to Understanding and Implementing IP Routing Protocols
MPLS and VPN Architectures
MPLS and VPN Architectures, Volume II
Network Security Technologies and Solutions (CCIE Professional Development Series)
Optimal Routing Design (paperback)
Programming and Automating Cisco Networks: A guide to network programmability and automation in the data center, campus, and WAN
Routing TCP/IP, Volume 1, 2nd Edition
Routing TCP/IP, Volume II (CCIE Professional Development)

FAQS

What are the prerequisites for the CCIE Enterprise Infrastructure v1.0 certification?

There are no formal prerequisites, but it is recommended to have a strong understanding of networking concepts and substantial hands-on experience.

What is the CCIE EI v1.0 exam format?

The 8-hour lab exam evaluates candidates across the entire network lifecycle, covering design, deployment, operation, and optimization of complex network scenarios. The exam comprises two fixed-time modules delivered in a specific sequence: Module 1: Design (3 hours) and Module 2: Deploy, Operate, and Optimize (5 hours).

What is the Module 1: Design (03 Hours) in CCIE EI Lab Exam?

Module 1 Design (3 hours): This module assesses the ability to create, analyze, validate, and optimize network designs. Candidates must understand technology capabilities, translate customer requirements into solutions, and assess readiness for proposed solutions. It is scenario-based, without device access, and candidates use provided documentation for web-based tasks. Examples include email threads, high-level designs, and network topology diagrams. Backward navigation is disabled, and points values for items are not displayed. Task formats include Drag-and-Drop, Multiple-Choice, and Dropdown items.

What is Module 2: Deploy, Operate, and Optimize (5 hours) in the lab exam?

Module 2 Deploy, Operate, and Optimize (5 hours): This module involves deploying networks per design specs, customer requirements, and restrictions. Candidates configure, integrate, and troubleshoot, covering all implementation steps. They then operate and optimize networks, monitoring health, enhancing service quality, reducing disruptions, and adjusting configurations. The setup mirrors a production network, combining hands-on and web-based tasks, often in a virtualized lab. Backward navigation is enabled, providing full visibility and displaying points values for each item.

What topics are covered in the CCIE EI v1.0 certification?

The CCIE EI v1.0 covers a broad range of topics, including but not limited to switched campus, routing concepts, infrastructure security, services, and network automation.

How long does it take to complete the CCIE Bootcamp?

The bootcamp typically spans 30 training days, with the first 15 days focusing on technology and labs, and the remaining 15 days dedicated to lab exam mock labs for thorough preparation.

What resources are available for exam preparation?

Various resources, including expert-led classes, official Cisco CCIE EI curriculum, Real-Labs mock labs, and online rack access, are provided to ensure a comprehensive and effective preparation for the CCIE Enterprise Infrastructure v1.0 certification.

₹ 1,10,000

₹ 99,000

Join Free Demo

Get brochure

Course Features

Total Duration : 300 Hrs (6/8 Months)
Batches Available : Weekdays/Weekends
Training Level : Expert
Lab Access: Yes, 24*7
Training Mode: Classroom & Online
Language: English, Hindi
Interview Questions: Yes
Exam Practice Questions: Yes
Training Certificate: Yes
Students Enrolled: 6473
Placement Assistance: Yes

EVENTS

Stay Ahead with Our Upcoming Training

Course	Start Date	Time (in IST)	Mode	Type	Enrollment
CCIE EI	November 30, 2024	10:00 am - 12:00 pm	Online/Offline	Upcoming	Enroll Now
CCIE EI	December 21, 2024	8:00 am - 10:00 am	Online/Offline	Upcoming	Enroll Now
CCIE EI	December 21, 2024	9:00 am - 12:00 pm	Online/Offline	Upcoming	Enroll Now