...

Multi-Track Job Guaranteed Training for Network Engineers

Welcome to our industry oriented Multi-Track Job Guaranteed Training for Network Engineers! 🚀 Dive into the dynamic world of networking with expert instructors, offering a hands-on experience through Real-Labs available 24*7. Our comprehensive curriculum, endorsed by Cisco, ensures you’re well-equipped for success. With placement assistance, embark on a transformative journey towards a rewarding career in networking. Elevate your skills, secure your future – enroll now!

HOW YOU’LL BENEFIT FROM THIS TRAINING?

Embark on a transformative journey with our Multi-Track Job Guaranteed Training for Network Engineers and reap the following benefits:
  • Intensive Hands-On Training: Immerse yourself in a comprehensive learning experience with 2-hour classes, 2-hour labs, and 2-hour study sessions, ensuring you develop advance level practical skills.
  • Expert Industry Instructors: Learn from seasoned industry professionals and certified trainers with Cisco credentials, boasting over 10 years of both industry and training expertise.
  • Master Network Engineering Skills: Acquire the essential skills to thrive as a successful network engineer, guided by our comprehensive curriculum.
  • Real-Time Practical Experience: Apply your knowledge in real-world scenarios, working with both networking devices and virtual appliances.
  • Core Module Mastery: Dive deep into core modules including CCNA, CCNP Enterprise Advanced Routing, CCNP Enterprise Core Technologies (ENCOR), Cisco ASA Firewall Foundation, Cisco IOS VPN Foundation, Checkpoint Firewall Foundation, Fortigate Firewall Foundation, and Next-Generation Firewall Palo-Alto Firewall.
  • Interview Preparation: Benefit from dedicated interview preparation sessions conducted by trainers with over 15 years of experience, ensuring you shine in job interviews.
  • Resume Writing Session: Craft a standout resume with our dedicated session, designed to showcase your newly acquired skills and set you apart in the job market.
  • Enterprise Network Implementation: Learn the ins and outs of implementing, managing, and operating enterprise-level networks, gaining practical insights for real-world scenarios.
  • Job Placement Readiness: Upon completion of the training, you’ll not only be equipped with skills but also job-ready, increasing your employability in the dynamic field of network engineering.

MODULES COVERED IN THIS TRAINING

  • Cisco CCNA
  • Cisco CCNP Enterprise Network Core Technologies (ENCOR)
  • Cisco CCNP Enterprise Advanced Routing and Services (ENARSI)
  • Network Security Foundation (Cisco ASA Firewall Foundation, VPN Foundation, Checkpoint Firewall Foundation, Fortigate Firewall Foundation)
  • Next-Generation Palo Alto Firewall (PCNSA/PCNSE)
  • Interview Preparation and Grooming Sessions

WHO SHOULD ENROLL

This comprehensive Multi-Track Job Guaranteed Training for Network Engineers is ideal for:
  • Aspiring Network Engineers
  • IT Professionals
  • Recent Graduates
  • Career Switchers
  • Cisco Certification Seekers
  • Networking Enthusiasts
  • Job Seekers
  • IT Support Professionals

TECHNOLOGY AREAS FOCUSED IN THIS TRAINING

  • Enterprise Networking: Master the fundamentals and advanced concepts of enterprise networking, including CCNA and CCNP Enterprise.
  • Advanced Routing: Dive into advanced routing techniques and protocols critical for efficient and secure data transmission.
  • Core Technologies: Explore the core technologies integral to the CCNP Enterprise certification (ENCOR) to build a strong foundation.
  • Firewall Foundations: Gain expertise in configuring and managing firewalls with a focus on Cisco ASA, Checkpoint, and Fortigate.
  • VPN Technologies: Learn the ins and outs of Virtual Private Networks (VPNs) on Cisco IOS, ensuring secure communication over networks.
  • Next-Generation Firewalls: Delve into the advanced features of next-generation firewalls, with a special focus on Palo-Alto Networks.

TRAINING PREREQUISITES

To maximize your success in our Multi-Track Job Guaranteed Training for Network Engineers, we recommend the following prerequisites:
  • Basic computer literacy
  • Basic PC operating system navigation skills
  • Basic Internet usage skills
  • Basic IP address knowledge
  • Motivation to Learn
  • Strong Communication skills.

COMMON JOB ROLES AFTER THIS TRAINING

  • Network Engineer
  • Network Administrator
  • Systems Administrator
  • Network Analyst
  • Security Engineer
  • Cybersecurity Analyst
  • Data Center L1 Engineer
  • Network Operations Center (NOC) Technician
  • Network Support Engineer
  • L1 Security Engineer
  • Security Operations Center (SOC) Technician
  • Technical Support Specialist
  • Firewall Engineer
  • Network Monitoring Engineer

MULTI-TRACK JOB GUARANTEED TRAINING OUTLINE

Module 1 CCNA :

  • Get Started with Cisco Command-Line Interface (CLI)
  • Observe How a Switch Operates
  • Perform Basic Switch Configuration
  • Implement the Initial Switch Configuration
  • Inspect TCP/IP Applications
  • Configure an Interface on a Cisco Router
  • Configure and Verify Layer 2 Discovery Protocols
  • Implement an Initial Router Configuration
  • Configure Default Gateway
  • Explore Packet Forwarding
  • Troubleshoot Switch Media and Port Issues
  • Troubleshoot Port Duplex Issues
  • Configure Basic IPv6 Connectivity
  • Configure and Verify IPv4 Static Routes
  • Configure IPv6 Static Routes
  • Implement IPv4 Static Routing
  • Implement IPv6 Static Routing
  • Configure VLAN and Trunk
  • Troubleshoot VLANs and Trunk
  • Configure a Router on a Stick
  • Implement Multiple VLANs and Basic Routing Between the VLANs
  • Configure and Verify Single-Area OSPF
  • Configure and Verify EtherChannel
  • Improve Redundant Switched Topologies with EtherChannel
  • Configure and Verify IPv4 ACLs
  • Implement Numbered and Named IPv4 ACLs
  • Configure a Provider-Assigned IPv4 Address
  • Configure Static NAT
  • Configure Dynamic NAT and Port Address Translation (PAT)
  • Implement PAT
  • Log into the WLC
  • Monitor the WLC
  • Configure a Dynamic (VLAN) Interface
  • Configure a DHCP Scope
  • Configure a WLAN
  • Define a Remote Access Dial-In User Service (RADIUS) Server
  • Explore Management Options
  • Explore the Cisco DNA™ Center
  • Configure and Verify NTP
  • Configure System Message Logging
  • Create the Cisco IOS Image Backup
  • Upgrade Cisco IOS Image
  • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  • Secure Console and Remote Access
  • Enable and Limit Remote Access Connectivity
  • Secure Device Administrative Access
  • Configure and Verify Port Security
  • Implement Device Hardening

Module 2 CCNP Enterprise (ENCOR + ENARSI)

  • Investigate the CAM
  • Analyze Cisco Express Forwarding
  • Troubleshoot VLAN and Trunk Issues
  • Tune Spanning Tree Protocol (STP) and Configure Rapid Spanning Tree Protocol (RSTP)
  • Configure Multiple Spanning Tree Protocol
  • Troubleshoot EtherChannel
  • Implement Multi-area OSPF
  • Implement OSPF Tuning
  • Apply OSPF Optimization
  • Implement OSPFv3
  • Configure and Verify Single-Homed EBGP
  • Implement Hot Standby Routing Protocol (HSRP)
  • Configure Virtual Router Redundancy Protocol (VRRP)
  • Implement NAT
  • Configure and Verify Virtual Routing and Forwarding (VRF)
  • Configure and Verify a Generic Routing Encapsulation (GRE) Tunnel
  • Configure Static Virtual Tunnel Interface (VTI) Point-to-Point Tunnels
  • Configure Wireless Client Authentication in a Centralized Deployment
  • Troubleshoot Wireless Client Connectivity Issues
  • Configure Syslog
  • Configure and Verify Flexible NetFlow
  • Configure Cisco IOS Embedded Event Manager (EEM)
  • Troubleshoot Connectivity and Analyze Traffic with Ping, Traceroute, and Debug
  • Configure and Verify Cisco IP SLAs
  • Configure Standard and Extended ACLs
  • Configure Control Plane Policing
  • Implement Local and Server-Based AAA
  • Write and Troubleshoot Python Scripts
  • Explore JavaScript Object Notation (JSON) Objects and Scripts in Python
  • Use NETCONF Via SSH
  • Use RESTCONF with Cisco IOS XE Software
  • Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6
  • Verify the EIGRP Topology Table
  • Configure EIGRP Stub Routing, Summarization, and Default Routing
  • Configure EIGRP Load Balancing and Authentication
  • Troubleshoot EIGRP Issues
  • Configure OSPFv3 for IPv4 and IPv6
  • Verify the Link-State Database
  • Configure OSPF Stub Areas and Summarization
  • Configure OSPF Authentication
  • Troubleshoot OSPF Issues
  • Implement Routing Protocol Redistribution
  • Manipulate Redistribution
  • Manipulate Redistribution Using Route Maps
  • Troubleshoot Redistribution Issues
  • Implement Policy-Based Routing (PBR)
  • Configure IBGP and External Border Gateway Protocol (EBGP)
  • Implement BGP Path Selection
  • Configure BGP Advanced Features
  • Configure BGP Route Reflectors
  • Configure MP-BGP for IPv4 and IPv6
  • Troubleshoot BGP Issues
  • Configure Routing with VRF-Lite
  • Implement Cisco IOS DMVPN
  • Obtain IPv6 Addresses Dynamically
  • Troubleshoot DHCPv4 and DHCPv6 Issues
  • Troubleshoot IPv4 and IPv6 Access Control List (ACL) Issues
  • Configure and Verify Unicast Reverse Path Forwarding (uRPF)
  • Troubleshoot Network Management Protocol Issues

Module 3 Network Security Foundation

  • Firewall Introduction
  • Understanding Firewall Fundaments
  • Configuring Basic Firewall Policies on Cisco ASA
  • Implementing Cisco IOS Zone-Bused Firewalls
  • Implementing AAA in Cisco lOS
  • Fundamentals of VPN Technology und Cryptography Before
  • Fundamentals of VPN Technology and Cryptography
  • Fundamentals of IP Security
  • Implementing IPsec Site-to-Site VPNs
  • Implementing SSL VPNs Using Cisco ASA
  • Cisco IDS-IPS Fundamentals
  • Network Foundation Protection
  • Securing the Management Plane
  • Duta Plane Protection
  • Securing Routing Protocols and Control Plane
  • Securing Layer 2 Technologies
  • Networking Security Concepts
  • Mitigation Technologies for E-mail-Bused and Web-Bused Threats
  • Mitigation Technologies for Endpoint Threats
  • Bring Your Own Device (BYOD)
  • Common Security Threats
  • Checkpoint Firewall basics
  • Fortinet Firewall Basics
  • Cisco FTD Basics

Module 4 Next-Generation Palo Alto Firewall (PCNSA/PCNSE)

  • Security Platform and Architecture:-Firewall Introduction
  • Security Platform and Architecture:-PaloAlto Firewall Introduction
  • Initial Configuration:-PaloAlto Lab Setup
  • Initial Configuration:-Basics with GUI and CLI
  • Initial Configuration:-Zone Implementation
  • Interface Configuration:-IPv4 Static & Default Routing and Path Monitoring GUI/CLI
  • Interface Configuration:-IPv4 Path Monitoring GUI/CLI
  • Interface Configuration:-Virtual Wire Deployment (vWire)
  • Advance-Routing:-IPv4 RIP Implementation GUI/CLI
  • Advance-Routing:-IPv4 RIP Troubleshoot
  • Advance-Routing:-IPv4 OSPF Implementation GUI/CLI
  • Advance-Routing:-IPv4 OSPF Troubleshoot
  • Advance-Routing:-IPv4 BGP Implementation GUI/CLI
  • Advance-Routing:-IPv4 BGP Troubleshoot
  • Advance-Routing:-IPv6 Static & Default Routing and Path Monitoring GUI/CLI
  • Advance-Routing:-IPv6 Path Monitoring GUI/CLI
  • Advance-Routing:-IPv6 OSPFv3 Implementation GUI/CLI
  • Advance-Routing:-IPv6 OSPFv3 Troubleshoot
  • Advance-Routing:-IPv6 MP-BGP Implementation GUI/CLI
  • Advance-Routing:-IPv6 MP-BGP Troubleshoot
  • Security and NAT Policies:-Network Address Translation (NAT) on IPv4
  • Security and NAT Policies:-PaloAlto Firewall Packet-Flow Introduction
  • Security and NAT Policies:-Network Address Translation (NAT) on IPv6
  • Site-to-Site VPNs:-IPv4 Site-Site VPN (PaloAlto-PaloAlto)
  • Site-to-Site VPNs:-IPv4 Site-Site VPN With Cisco Router
  • Site-to-Site VPNs:-IPv4 Site-Site VPN With Cisco ASA
  • Site-to-Site VPNs:-IPv4 Site-Site VPN Troubleshoot
  • Site-to-Site VPNs:-IPv6 Site-Site VPN
  • Site-to-Site VPNs:-IPv4 Site-Site with Certificate Authentication
  • GlobalProtect™:-Secure Sockets Layer (SSL) VPN
  • Active/Passive High Availability (HA)
  • Decryption
  • App-ID™
  • Content-ID™
  • URL Filtering
  • WildFire™
  • User-ID™
  • Monitoring and Reporting
  • Next-Generation Security Practices

TRAINING DETAILS

Training Name Multi-Track Job Guaranteed Training for Network Engineers
Training Type Instructor Led Training (Classroom/Online)
Batches Available Regular (Mon-Thu) and (Sat-Sun)
Training Duration 08-10 Months
Daily Training Hours 6 Hrs/day (2-hour classes, 2-hour labs, and 2-hour study)
Payment Mode Cash, Credit Card, Debit Card, Bank Transfer, No Cost EMI, UPI, Education Loan etc Available.
Recorded Video Lectures Yes accessible via our learning portal
Lab Access Yes Provided (24*7 Lifetime Access)
Study Material Workbooks, Notes Handouts, Exam Prep Material, Interview Prep Material
Learning Portal World-class learning system (Web portal, iOS Application, Android Application)

FAQS

What is Multi-Track Job Guaranteed Training?
Multi-Track ob Guaranteed Training for Network Engineers is a comprehensive program that covered multiple core tracks of network domain, ensuring participants gain expertise in various areas. The “Job Guaranteed” aspect implies that successful completion of the program guarantees job placement.
How does the Job Guarantee work in Multi-Track Training?
The Job Guarantee in Multi-Track Training means that upon successful completion of the program, participants are assured job placement in their respective fields of specialization within the industry.
What kind of job placement assistance is provided in Multi-Track Training?
Multi-Track Job Guaranteed Training includes job placement assistance, which may involve resume building, interview preparation, and connecting participants with industry partners and job opportunities.
Are certifications included in Multi-Track Job Guaranteed Training?
Yes, certifications are included in Multi-Track Job Guaranteed Training. As part of the program, participants have the opportunity to obtain free global certifications from specific vendors. These certifications enhance the participants’ skillsets, validate their expertise in relevant domains, and contribute to their overall professional development. Participants also receive an authorized training completion certificate from I-Medita as part of the Multi-Track Job Guaranteed Training.
Is financial aid or payment plans available for Multi-Track Training?
Yes, financial aid and payment plans are available for Multi-Track Training. Participants can opt for installment payments, take advantage of no-cost EMI options on credit and debit cards, and explore education bank loans as part of the training program. These flexible payment options aim to make the training more accessible to a broader range of individuals, ensuring that financial considerations do not hinder participation.
How can I enroll in Multi-Track Job Guaranteed Training?
To enroll in Multi-Track Job Guaranteed Training, you can fill out the “Contact Us” form, and our team will assist you with the enrollment process. This form serves as a convenient way to express your interest and initiate the necessary steps to join the training program.
Can I participate in the demo classes for the training program?
Yes, we offer demo classes for the training program. To participate in a demo class, please fill out the demo form available on our website, or you can call our helpline at +91-8750004411. This allows prospective participants to experience a preview of the training content and teaching style before making an enrollment decision.
Job Guaranteed Training for Network Engineers

₹ 100,000

₹ 89,000

Course Features

EVENTS

Stay Ahead with Our Upcoming Training
Course Start Date Time (in IST) Mode Type Enrollment
Job Guarantee Courses January 27, 2025 10:00 am - 12:00 pm Online/Offline Upcoming Enroll Now
Job Guarantee Courses February 1, 2025 9:00 am - 12:00 pm Online/Offline Upcoming Enroll Now
Job Guarantee Courses February 1, 2025 10:00 am - 12:00 pm Online/Offline Upcoming Enroll Now
Job Guarantee Courses February 10, 2025 6:30 pm - 8:30 pm Online/Offline Upcoming Enroll Now
Job Guarantee Courses February 15, 2025 5:00 pm - 7:00 pm Online/Offline Upcoming Enroll Now
Job Guarantee Courses February 17, 2025 8:00 am - 10:00 am Online/Offline Upcoming Enroll Now
Job Guarantee Courses February 17, 2025 12:00 pm - 2:00 pm Online/Offline Upcoming Enroll Now

MEET OUR EXPERT TRAINERS

Elevate Your learning with Our Certified Expert Trainers!

Success Stories

Celebrating the Journey from training to Career – Hear from Our Placed students!

YOU MAY LIKE

A GREAT PLACE TO LEARN AND GROW

At I-Medita, we’re your launchpad for growth – a place where learning transforms into success.

Authorized Vendor & Certification Partners

cisco partner
checkpoint partner
Microsoft Partner
Fortinet Partner
Cato Networks Partner
EC COUNCIL Partner
HPE Partner
Sophos Partner
Scroll to Top